IMAGING
Insulectro supplies Dry Film from Qnity™ to support all your imaging needs.
About IMAGING
Qnity™ Riston® dry film photoresist delivers the highest quality dry film on the market. Qnity™ delivers fine line resolution, high quality, lowest operating cost, and clean processing photo resists for all types of plating and etching applications. Qnity™ dry films are manufactured and converted in America. Between our supply chain, logistics and technical support expertise, Insulectro delivers the best imaging solution in the industry.
custom services
- Process Audits
- FTIR Analysis
- Profilometry Analysis
- EDAX/SEM Analysis
Conventional Inner Layer Dry Film
Conventional Outer Layer Dry Film
Conventional 1.5-2.5 mils. General purpose film.
Direct Imaging Inner Layer Dry Film
Single wavelength(365nm) direct imaging 30 micron print and etch film. Good in alkaline and acid etching.
Dual wavelength(365nm/405nm) direct imaging 30 micron print and etch film. Good in alkaline and acid etching.
Direct Imaging Outer Layer Dry Film
Dual wavelength (365/405nm) direct imaging 1.2-4.0 mil plating film. Improved adhesion over LDI7200.
MSAP Dry Film
These are thin resists formulated for sub 25 micron resolution.
Selective Strip Dry Film
These are conventional thick films. They can be used for electrolytic gold plating or conformance needs.
Selective ENIG Dry Film
This film is a low leaching formulation specifically to be used for selective ENIG.